Universal light tent for all types of hiking, with full anchorage and very stable. Self-supporting construction with an apse for storing luggage.
Tropiko is made of Polyester with a polyurethane coating, which gives it a water column with a height of 4,000 mm. The seams are sealed against leakage with heating tape.
The floor is made of laminated polyethylene with Rip-Stop treatment.
The rods consist of laminate segments with a diameter of 8.5 mm.
|Number of persons||2 – 3|
|Number of entrances||1|
|Number of vents||2|
|Number of bars / crossing points||2/1|
|Can be built without a bedroom||No|
|Tent height (bedroom)||115 (110) cm|
|Number of pins||12|
|Rod diameter||8.5 mm|
|Tropical material||Polyester, PU coating 4,000 mm H2O|
|Floor material||Laminated Polyethylene Rip-Stop|
The tent is double-skinned and consists of an inner tent and an outer skin – a tropic. The inner tent has a rectangular floor plan with an entrance on its shorter side. The outer tent has a triangular apse on the entrance side, suitable for storing luggage, for example. We can decide whether to open the left or right half of the entrance, or both at the same time. We will use the option, for example, during cooking and thus create the necessary lee.
It is located at the top of the dome of the tropics. The roofs of the ventilation windows are shaped so that they are not tilted by the wind, if necessary they can be closed with Velcro. This prevents leakage even in rain with strong winds.
We hang the inner tent with hooks on a structure made of crossed bars, the ends of which are inserted into metal hollow rivets in the corners of the floor. We pull the tropico over the structure and insert the rod tensioning the hall into the perforated sleeve, insert it into the metal hollow rivets and tighten it into the arch. Then we attach velcro fasteners on the underside of the tropics to the rods. Fasten the plastic trident fasteners on the lower edge of the tropics and switch off the tropics. We anchor the tent with pegs and cords.