Pinguin STORM 3


Pinguin camping gear

Pinguin STORM 3.  Spacious tunnel-type tent for three people with a well-used interior space.

Availability: In stock

SKU: 8592638148343 Category: Tags: , , , ,

Pinguin tents

Very spacious tunnel type tent, suitable even for worse weather conditions, thanks to its low profile. 

The tunnel construction guarantees a very good use of the interior space.

Tropiko is made of Polyester with a polyurethane coating, guaranteeing a water column with a height of 4,000 mm. The seams are sealed with waterproof tape.

The floor is made of Nylon with a Polyurethane coating, providing 10,000 mm of water column.

The rods consist of laminate segments with a diameter of 9.5 mm.

Technical parameters

Mass 5.1 kg
Weight without bedroom 3.7 kg
Dimensions after packing ⌀20 x 48 cm
Number of persons 2 – 3
Number of entrances 2
Construction Tunnel
Number of vents 3
Number of bars / crossing points 3/0
Can be built without a bedroom Yes
Tent height (bedroom) 110 (100) cm
Siliconized No
Glued seams Yes
Number of pins 17
Category Trekking
Rod material Laminate
Rod diameter 9.5 mm
Material tropico Polyester, PU coating 4,000 mm H2O
Floor material Nylon, PU coating 10,000mm H2O


The double-skinned tent consists of an inner tent and an outer skin – the tropics. The entrance to the inner tent is on the front side, the outer tent has a large hall, suitable for storing luggage, cooking, etc., which can be entered through the front or side entrance.


The tent is based on the principle that the rod structure, strung in the sleeves, is outside the tropics. The tropic and the inner tent (which is hung under the tropic) are then set up at the same time after the rods are threaded through the sleeves. The advantages of this method are:

  • the construction of the tent is very fast
  • if we build in the rain does not get wet indoor tent
  • the inner tent can be detached from the tropics and the tropics can then be set up separately, thus obtaining a single-layer tent without a floor.


It is secured by three ventilation windows, which are located at the front entrance and in the back of the tropics. The roof of the ventilation window is shaped so that it is not tilted by the wind. This prevents leakage even in rain with strong winds.

Tent construction

Insert the sleeves of the structure through the sleeves and insert steel mandrels into the tubes at the end of the rods, which are threaded on the loops of the lower edge of the tropics. We fasten the inner tent in the loops on the inner side of the tropics. The tent is not self-supporting, it is necessary to anchor it with at least a minimum number of pegs, or switch cords. Finally, turn off the tropico with plastic clips at the bottom edge of the tent.

Manufacturer website



Pinguin is one of the oldest Czech brands making equipment for an active stay outdoor. It belongs among the traditional manufacturers in the tourism segment, who have shaped outdoor equipment in the form we know it now. The owner of the Pinguin brand is the Czech company Activent 365 s.r.o., headed by the original founders.
Pinguin camping gear


There are no reviews yet.

Be the first to review “Pinguin STORM 3”

Your email address will not be published. Required fields are marked *